FAQ

The Multi-zone Ceiling Cassette are mainly for the single growing room.One outdoor unit connect one indoor unit.
The Multi-zone Multi-split are used for multi growing rooms and much larger commercial space.One outdoor unit can connect multiple indoor units.It is DC Inverter and it is more energy-saving.

The basic standard is 3500 to 4000 Btu’s of cooling are required to compensate for the quantity of heat generated by a 1000 watt light. Eg : 10 X 1000 watt lights would need about 35,000 and 40,000 Btu’s of cooling. It is general guidelines as room conditions, ambient air temperatures and ventilation systems all change.

The built-in water pump is optional.If with it,the condensation can go up.If without it,the condensation only can discharged downward.
It is better that the unit is equipped with water pump.

The wire controller can be installed in the growing space.

Please follow the instruction manual.

No.Normal Multi-zone Split AC or common Ductless AC do not introduce the fresh air to affect the CO2.If Multi-zone Multi-split’s indoor unit use all fresh air system,the CO2 are a little different.

Indoor or Outoor are fine.
When put it inside,the cold air blows into the room, and the hot air blows outside through the exhaust pipe.
When put it outside,the cold air is blown into the room through the exhaust pipe.

Put the unit outside and blow the hot air or cold air through the exhaust pipe.
By the Air Comfort kit(Optional), the wind direction can be up and down, left and right adjustment.
The user use remote control.The compressor’s noise can be insulated.
Waterproof grade IPX2

Window Kit,Wall Kit,Active Carbon Filter,Air Stop,Air Comfort kit,Second hose 3m and adaptor

The Mobile air conditioning belongs to local cooling, so the cooling range is relatively small, but faster than ordinary air conditioning.
It does not require installation. So it’s suitable for smaller space like Small Growing Tent,Small Gardening room,Kitchen etc.

It is ready-to-use air conditioner which can cool gardens,larger temporary space etc.

Yes.Basically,the commercial system can be customized base of your specific requirement,power supply,working condition,environment etc.The production period will be longer. Please let us know your more request for the inquiry for this kind of products.

For the commercial products like Duct AC,Roof Mounted,Air Handler Unit etc,it is strongly suggested to let the professional engineer to handle them.Then it can avoid the problems encountered during installation.

No.The outdoor condensing unit is antisepsis, rust prevention and moistureproof.

All the cir conditioning system and climate system use Eco-friendly R410a gas.The Dehumidifier use R410a or R134a.
If you have other different request,please let us know.

Please refer to the product’s specification.

Please refer to the the product’s specification.

The humidifier consists of a compressor, a heat exchanger, a fan, a water tank, a housing and a controller. Its working principle is that the humid air is pumped into the unit by a fan and then condensed into water droplets through a heat exchanger, which become the dry air and discharged outside. This repeated circulation reduces the indoor humidity.
The dehumidifier has many functions, such as reducing indoor humidity to fit for plants’ growing. Prevent mildew from indoor enviroment. Ensure the normal use of all kinds of indoor appliances and equipments in the growing space. Prevent the electrical line from dampness.

The dehumidifier do not change the indoor temperature, but normal AC’s dehumidification will decrease the indoor temperature a little.
The dehumidifier’s efficiency is higher. For the AC, dehumidification is only an additional function.
The power consumption of dehumidifier is smaller than that of AC’s dehumidification.
In hot summer, when you need to dehumidify the room, it is better to use AC; if it is in winter when the weather temperature is low, it is recommended to use dehumidifier.

Yes.Basically,all of units have this function.The unit will automatically restart and retain the previous settings in case of power interruption.It is important for the areas where electricity is unstable.

Normally the range is RH30%-RH80%.If there is special request or inquiry,please let us know.

220V/50HZ,380V/50HZ or 110V/60HZ base of the specific types.Please let us know if you have different request.

*The dehumidifier has to change its position every once in a while especially for low capacity dehumidifier.
*Airtight space let dehumidifier run more effectively.
*Keep the circulation path of dehumidifier unblocked(the intake and outlet outlets).The rear is preferably 30 cm away from the wall.
*Storage tanks should be cleaned up in time.
*Dehumidifier should be placed smoothly, so the machine does not consume electricity.
*Clean the filter net with warm water every two weeks.

For indoor growing purpose,after using the humidifier for a period of time, such as one or two weeks, it is necessary to regularly remove
For living space humidifier,the humidifier should change water every day and wash it weekly.
the scales in the water tank to remove the stale water to ensure the best condition.
2.What kind of water do the user use?
For indoor growing purpose,the tap water is fine.
For living space humidifier, it is suggested the user can use mineral water or purified water.

For indoor growing purpose,the tap water is fine.
For living space humidifier, it is suggested the user can use mineral water or purified water.

Base of the market’s request.220V/50HZ,220V/60HZ, 110V/60HZ.

There are following suggestion.
See if the motor head and the whole part of unit will vibrate in the low and medium speed gear, specially when the high speed rotates.
See if it senses the heat of the front shell of fan motor by hand or other devices after a long period of high speed rotation (at least 1 hour later). If it feels very hot, it shows that the heat dissipation performance of the fan motor is not good.
Look at its speed, power, air volume, noise and other parameters
Check if there is intermittent pause in the high-speed rotation of pendulum head,if there is a swing head is not in place.
Check if it is full copper fan motor.

Consider the purpose and environment.For ordinary air, there are not many request.
Determine the air volume to be transported in the duct.
Then caculate the total frictional resistance of duct and accessories.
According to the above two parameters, increase the allowance of 10%, that is the fan you need to select.

If space permits, try to buy large size ceiling fans instead of small size one.
Selection of height (Hanger): The length of suspender used for different ceiling height is different.
When installed, the minimum distance between fan and ground is 2.3 m.If below this,it is unsafe and the effect of wind is not good.
The number of lights and lights depends on whether lighting is needed, even if the lighting is not added, the lamp is still pretty.
If you want stronger wind, please choose a larger size, you can choose iron blades. Under the same size, the iron blade is stronger than
the wood blade.

Solar exhaust fan, compact and energy-saving, no need to lay separate cable, installation time is very short and very low operating cost.

In cold climates, heat accumulates in roof space, which melts snow on the roof and freezes on the lower eaves, creating damaging ice dams.The Solar Exhaust Fan can reduces heat build up and prevents ice damming.
In summer, it can eliminate a lot of heat in the indoor air, can reduce up to 50% of the use of indoor cooling air conditioning equipment.

It is made of special fiber material which is corrosion resistant, anti condensation and flame retardant.
It is characterized by the permeability of fibre materials and the formation of multiple rows of small holes on the surface of air ducts by laser holes, so that air can be evenly distributed in all areas of the room.